 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Power management (dual digital transistors) IMD16A Features 1) Two digital class transistors in a SMT package. 2) Up to 500mA can be driven. 3) Low VCE(sat) of drive transistors for low power dissipation. Package, marking, and packaging specifications Part No. Package Marking Code Basic ordering unit (pieces) IMD16A (3) (2) (1) Dimensions (Unit : mm) (4) (5) (6) SMT6 D16 T108 3000 ROHM : SMT6 EIAJ : SC-74 Each lead has same dimensions Absolute maximum ratings (Ta=25C) DTr1 (PNP) Parameter Supply voltage Input voltage Output current Symbol VCC VIN IC Limits -50 -12 5 -500 Unit V Inner circuit (4) (5) (6) R2=22k R1=2.2k V DTr2 DTr1 mA R1=100k DTr2 (NPN) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Symbol VCBO VCEO VEBO IC Limits 50 50 5 100 Unit V V V mA (3) (2) (1) Total Parameter Collector power dissipation Junction temperature Storage temperature Symbol Pd Tj Tstg Limits 300(TOTAL) 150 -55 to +150 Unit mW C C 200mW per element must not be exceeded. www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 1/3 2009.06 - Rev.E IMD16A Electrical characteristics (Ta=25C) DTr1 Parameter Input voltage Output voltage Input current Output current DC current gain Transition frequency Input resistance Resistance ratio Symbol VI(off) VI(on) VO(on) II IO(off) GI Min. - -2 - - - 82 - 1.54 8 Typ. - - - - - - 250 2.2 10 Max. -0.3 - -0.3 -3 -0.5 - - 2.86 12 Unit V V mA A - MHz k - Conditions VCC= -5V , IO= -100A VO= -0.3V , IO= -20mA IO/II= -50mA / -2.5mA VI= -5V VCC= -50V , VI=0V IO= -50mA , VO= -5V VCE= -10V , IE=50mA , f=100MHz - - Data Sheet 1 fT 2 R1 R2 / R1 1 Measured using pulse current. 2 Transition frequency of mounted transistor. DTr2 Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Input resistance Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT R1 Min. 50 50 5 - - - 100 - 70 Typ. - - - - - - 250 250 100 Max. - - - 0.5 0.5 0.3 600 - 130 Unit V V V A A V - MHz k IC=50A IC=1mA IE=50A VCB=50V VEB=4V IC/IB=1mA/0.1mA VCE=5V , IC=1mA VCE=10V , IE=-5mA , f=100MHz - Conditions Transition frequency of mounted transistor. www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 2/3 2009.06 - Rev.E IMD16A Electrical characteristic curves DTr1 (PNP) 100 50 20 10 5 2 1 500m 200m 100m 500 1m 2m 5m 10m 20m 50m 100m 200m 500m Ta= -40C Ta=25C Ta=100C VO=0.3V 10m 5m VCC=5V Data Sheet 1k 500 Ta=100C DC CURRENT GAIN : GI VO=5V OUTPUT CURRENT : Io (A) INPUT VOLTAGE : VI(on) (V) 2m 1m 500 200 100 50 20 10 5 2 1 0 200 100 50 20 10 5 2 Ta=25C Ta= -40C Ta=100C Ta=25C Ta= -40C 500m 1 1.5 2 2.5 3 1 500 1m 2m 5m 10m 20m 50m 100m 200m 500m OUTPUT CURRENT : IO (A) INPUT VOLTAGE : VI(off) (V) OUTPUT CURRENT : IO (A) Fig.1 Input voltage vs. Output current (ON characterisitics) Fig.2 Output current vs. Input voltage (OFF characteristics) Fig.3 DC current gain vs. Output current characteristics 1 500m OUTPUT VOLTAGE : VO(on) (V) IO/II=20/1 Ta=100C 200m 100m 50m 20m 10m 5m 2m 1m 500 1m 2m Ta=25C Ta= -40C 5m 10m 20m 50m 100m 200m 500m OUTPUT CURRENT : IO (A) Fig.4 Output voltage vs. Output current characteristics DTr2 (NPN) 500 DC CURRENT GAIN : hFE Ta=100C VCE=5V COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 1k 1 IC/IB=10/1 500m 200m 100m 50m 20m 10m 5m 2m 1m 10 20 50 100 200 500 1m 2m 5m 10m Ta= -40C Ta=100C Ta=25C 200 100 50 20 10 5 2 1 10 20 50 100 200 500 1m 2m 5m 10m Ta=25C Ta= -40C COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (A) Fig.5 DC current gain vs. Output current characteristics Fig.6 Output voltage vs. Output current characteristics www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 3/3 2009.06 - Rev.E Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of IMD16A09
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |